最終更新:2013-06-11 (火) 14:35:57 (3965d)
ODROID-X/Ubuntu
ドキュメント
バージョン
Ubuntu 13.04 (Xfce、Canonical版)
- Ubuntu 13.04 root file system (Original Canonical Build not Linaro)
- X.org? version is changed to 1.13.3
- Xubunutu?/XFCE? is the default desktop UI becase the latest Ubuntu/Unity desktop is not working on ARM platform.
Ubuntu 12.04 (Linaro/Ubuntu)
メモ
- odroidx_20120912-linaro-precise-ubuntu-desktop_with_HDMI.imgを入れてみた。
Ubuntu Tweak
- CPU: Unknown
- Memory: 992.7MB
- Hostname: linaro-ubuntu-desktop
- Platform: armv7l
- Distribution: Linaro 12.08 precise
- Desktop Environment: Unity 2D
パーティション
ボリュームラベル | 容量 | フォーマット | マウントポイント |
Unknown | 4.2MB | ? | - |
boot | 55MB | FAT | /media/boot |
rootfs | 8.0GB | ext4 | / |
uname -a
Linux linaro-ubuntu-desktop 3.6.0-rc5 #1 SMP PREEMPT Wed Sep 12 16:25:07 KST 2012 armv7l armv7l armv7l GNU/Linux
Linux/proc/cpuinfo
$ cat /proc/cpuinfo Processor : ARMv7 Processor rev 0 (v7l) processor : 0 BogoMIPS : 1992.29 processor : 1 BogoMIPS : 1992.29 processor : 2 BogoMIPS : 1992.29 processor : 3 BogoMIPS : 1992.29 Features : swp half thumb fastmult vfp edsp neon vfpv3 tls CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc09 CPU revision : 0 Hardware : ODROID-X Revision : 0000 Serial : 0000000000000000
dmesg
[ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.6.0-rc5 (ruppi@ruppi-Virtualbox) (gcc version 4.7.1 (Ubuntu/Linaro 4.7.1-5ubuntu1~ppa1) ) #1 SMP PREEMPT Wed Sep 12 16:25:07 KST 2012 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: ODROID-X [ 0.000000] cma: CMA: reserved 16 MiB at 6e800000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] CPU EXYNOS4412 (id 0xe4412211) [ 0.000000] exynos4_init_clocks: initializing clocks [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics [ 0.000000] s3c_register_clksrc: clock armclk has no registers set [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set [ 0.000000] audiocdclk: no parent clock specified [ 0.000000] exynos4_setup_clocks: registering clocks [ 0.000000] exynos4_setup_clocks: xtal is 24000000 [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000 [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=160000000 [ 0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000 [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000 [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 50000000 [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 50000000 [ 0.000000] On node 0 totalpages: 257792 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 188944 pages, LIFO batch:31 [ 0.000000] HighMem zone: 526 pages used for memmap [ 0.000000] HighMem zone: 66802 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 7 pages/cpu @c0d72000 s7744 r8192 d12736 u32768 [ 0.000000] pcpu-alloc: s7744 r8192 d12736 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255746 [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200n8 root=UUID=c21f1426-e878-4f05-a063-0a9c5e4234d0 rootwait ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 48MB 216MB 743MB = 1007MB total [ 0.000000] Memory: 988624k/1005008k available, 42544k reserved, 269312K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc04b1b24 (4775 kB) [ 0.000000] .init : 0xc04b2000 - 0xc04dae40 ( 164 kB) [ 0.000000] .data : 0xc04dc000 - 0xc052cd80 ( 324 kB) [ 0.000000] .bss : 0xc052cda4 - 0xc0565a20 ( 228 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:549 [ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.045000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736) [ 0.045000] pid_max: default: 32768 minimum: 301 [ 0.045000] Mount-cache hash table entries: 512 [ 0.045000] CPU: Testing write buffer coherency: ok [ 0.045000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00 [ 0.045000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.045000] Setting up static identity map for 0x40377bd0 - 0x40377c28 [ 0.045000] L310 cache controller enabled [ 0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B [ 0.070000] CPU1: Booted secondary processor [ 0.090000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01 [ 0.090000] CPU1: Unknown IPI message 0x1 [ 0.100000] CPU2: Booted secondary processor [ 0.120000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02 [ 0.120000] CPU2: Unknown IPI message 0x1 [ 0.130000] CPU3: Booted secondary processor [ 0.150000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03 [ 0.150000] CPU3: Unknown IPI message 0x1 [ 0.150000] Brought up 4 CPUs [ 0.150000] SMP: Total of 4 processors activated (7969.17 BogoMIPS). [ 0.150000] devtmpfs: initialized [ 0.155000] dummy: [ 0.155000] NET: Registered protocol family 16 [ 0.160000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.170000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.170000] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.170000] S3C Power Management, Copyright 2004 Simtec Electronics [ 0.170000] EXYNOS4x12 PMU Initialize [ 0.170000] EXYNOS: Initializing architecture [ 0.180000] bio: create slab <bio-0> at 0 [ 0.180000] hdmi_5v: 5000 mV [ 0.180000] usbcore: registered new interface driver usbfs [ 0.180000] usbcore: registered new interface driver hub [ 0.180000] usbcore: registered new device driver usb [ 0.180000] s3c-i2c s3c2440-i2c.0: slave address 0x10 [ 0.180000] s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz [ 0.180000] max77686 0-0009: device found [ 0.180000] max77686 0-0009: irq is not specified [ 0.185000] VDD_ALIVE_1.0V: 1000 mV [ 0.185000] VDDQ_M1M2_1.8V: 1800 mV [ 0.190000] VDDQ_M0_1.8V: 1800 mV [ 0.190000] VDDQ_MMC2_2.8V: 2800 mV [ 0.195000] VDDQ_MMC13_1V8: 1800 mV [ 0.195000] VDD_MPLL_1.0V: 1000 mV [ 0.200000] VDD_VPLL_1.0V: 1000 mV [ 0.205000] VDD10_HDMI_1.0V: 1000 mV [ 0.205000] VDD_VTCORE_1.0V: 1000 mV [ 0.210000] VDDQ_MIPIHSI_1.8V: 1800 mV [ 0.210000] VDD18_ABB1_1.8V: 1800 mV [ 0.215000] VDD33_UOTG_3.3V: 3300 mV [ 0.215000] VDDQ_C2C_1.8V: 1800 mV [ 0.220000] VDD18_ABB2_1.8V: 1800 mV [ 0.220000] VDD10_HSIC_1.0V: 1000 mV [ 0.225000] VDD18_HSIC_1.8V: 1800 mV [ 0.230000] VDDQ_CAM_1.8V: 1800 mV [ 0.230000] VDD_LDO18_1.8V: 1800 mV [ 0.230000] VDD_VTCAM_1.8V: 1800 mV [ 0.230000] VDD_LDO20_1V8: 1800 mV [ 0.235000] VDD_SDCARD_3.3V: 3300 mV [ 0.235000] VDD_LDO22_2.8V: 2800 mV [ 0.240000] VDD_TOUCH_2.8V: 2800 mV [ 0.245000] VDD_TOUCHLED_3.3V: 3300 mV [ 0.245000] VDDQ_LCD_1.8V: 1800 mV [ 0.250000] VDD_MOTOR_3.0V: 3000 mV [ 0.250000] VDD_MIF_1.0V: 800 <--> 1050 mV at 1000 mV [ 0.250000] VDD_ARM_1.3V: 800 <--> 1350 mV at 1100 mV [ 0.255000] VDD_INT_1.0V: 800 <--> 1150 mV at 1000 mV [ 0.255000] VDD_G3D_1.0V: 850 <--> 1200 mV at 1000 mV [ 0.255000] VDDQ_CKEM1M2_1.2V: 1200 mV [ 0.260000] VDD_INL_1.35V: 1350 mV [ 0.260000] VDD_INL_2.0V: 2000 mV [ 0.265000] VDD_BUCK8_2.8V: 2800 mV [ 0.270000] VDD_BUCK9_1.2V: 1200 mV [ 0.270000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter [ 0.270000] s3c-i2c s3c2440-i2c.1: slave address 0x10 [ 0.270000] s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz [ 0.270000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter [ 0.270000] s3c-i2c s3c2440-i2c.3: slave address 0x10 [ 0.270000] s3c-i2c s3c2440-i2c.3: bus frequency set to 97 KHz [ 0.270000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter [ 0.270000] s3c-i2c s3c2440-i2c.7: slave address 0x10 [ 0.270000] s3c-i2c s3c2440-i2c.7: bus frequency set to 97 KHz [ 0.270000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter [ 0.270000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10 [ 0.270000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 97 KHz [ 0.270000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter [ 0.270000] Linux video capture interface: v2.00 [ 0.270000] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.270000] cfg80211: Calling CRDA to update world regulatory domain [ 0.270000] Switching to clocksource mct-frc [ 0.280000] NET: Registered protocol family 2 [ 0.280000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.280000] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) [ 0.280000] TCP: Hash tables configured (established 131072 bind 65536) [ 0.280000] TCP: reno registered [ 0.280000] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.280000] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.280000] NET: Registered protocol family 1 [ 0.285000] Trying to unpack rootfs image as initramfs... [ 0.945000] Freeing initrd memory: 11392K [ 0.945000] bounce pool size: 64 pages [ 0.955000] msgmni has been set to 1459 [ 0.955000] io scheduler noop registered [ 0.955000] io scheduler deadline registered [ 0.955000] io scheduler cfq registered (default) [ 0.955000] start plist test [ 0.965000] end plist test [ 0.965000] s3c-fb exynos4-fb.0: start latency exceeded, new value 833 ns [ 0.965000] s3c-fb exynos4-fb.0: state restore latency exceeded, new value 34292 ns [ 0.985000] Console: switching to colour frame buffer device 170x48 [ 0.995000] s3c-fb exynos4-fb.0: window 0: fb [ 1.000000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056 [ 1.000000] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.005000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056 [ 1.005000] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.005000] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056 [ 1.005000] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.080000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.080000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10 [ 1.080000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10 [ 1.970000] console [ttySAC1] enabled [ 1.975000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10 [ 1.985000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10 [ 2.000000] brd: module loaded [ 2.005000] loop: module loaded [ 2.010000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.010000] s5p-ehci s5p-ehci: S5P EHCI Host Controller [ 2.015000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1 [ 2.025000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000 [ 2.040000] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00 [ 2.040000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.045000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.055000] usb usb1: Product: S5P EHCI Host Controller [ 2.060000] usb usb1: Manufacturer: Linux 3.6.0-rc5 ehci_hcd [ 2.065000] usb usb1: SerialNumber: s5p-ehci [ 2.070000] hub 1-0:1.0: USB hub found [ 2.075000] hub 1-0:1.0: 3 ports detected [ 2.075000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.085000] exynos-ohci exynos-ohci: Already power on PHY [ 2.090000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller [ 2.095000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2 [ 2.100000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000 [ 2.165000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.170000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.180000] usb usb2: Product: EXYNOS OHCI Host Controller [ 2.185000] usb usb2: Manufacturer: Linux 3.6.0-rc5 ohci_hcd [ 2.190000] usb usb2: SerialNumber: exynos-ohci [ 2.195000] hub 2-0:1.0: USB hub found [ 2.195000] hub 2-0:1.0: 3 ports detected [ 2.200000] usb3503: USB HUB driver init [ 2.205000] usb3503: usb3503_probe:375 [ 2.210000] usb3503: usb3503_set_mode: mode = 1 [ 2.320000] usb3503: usb3503_register_write: reg: e7 data: 3 write failed [ 2.320000] usb3503: reg_write: write E7, req:03, val:00 [ 2.325000] usb3503: SP_ILOCK write fail err = -111 [ 2.330000] usb3503: usb3503_probe: probed on hub mode [ 2.335000] i2c-core: driver [usb3503] using legacy suspend method [ 2.345000] i2c-core: driver [usb3503] using legacy resume method [ 2.350000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling [ 2.355000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0 [ 2.365000] s5p-hdmiphy 8-0038: probe successful [ 2.375000] s5p-hdmi exynos4-hdmi: probe successful [ 2.380000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd. [ 2.390000] s5p-mixer s5p-mixer: probe start [ 2.395000] s5p-mixer s5p-mixer: resources acquired [ 2.400000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi' [ 2.405000] s5p-mixer s5p-mixer: module s5p-sdo is missing [ 2.410000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video0 [ 2.420000] fb1: registered frame buffer emulation for /dev/video0 [ 2.425000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video1 [ 2.430000] fb2: registered frame buffer emulation for /dev/video1 [ 2.440000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video2 [ 2.445000] fb3: registered frame buffer emulation for /dev/video2 [ 2.450000] s5p-mixer s5p-mixer: probe successful [ 2.455000] cpuidle: using governor ladder [ 2.460000] sdhci: Secure Digital Host Controller Interface driver [ 2.465000] sdhci: Copyright(c) Pierre Ossman [ 2.470000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (50000000 Hz) [ 2.475000] mmc0: no vmmc regulator found [ 2.480000] Registered led device: mmc0:: [ 2.510000] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA [ 2.515000] Registered led device: led1 [ 2.515000] Registered led device: led2 [ 2.515000] usbcore: registered new interface driver usbhid [ 2.520000] usbhid: USB HID core driver [ 2.540000] mmc0: new high speed SDHC card at address 0002 [ 2.545000] mmcblk0: mmc0:0002 SD 7.55 GiB [ 2.550000] mmcblk0: p1 p2 p3 [ 2.550000] max98090 1-0010: revision 0x42 [ 2.555000] usb 1-2: new high-speed USB device number 2 using s5p-ehci [ 2.565000] [MAX98090] max98090_set_record_main_mic(150) [ 2.570000] hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 <-> samsung-i2s.0 mapping ok [ 2.580000] hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 <-> samsung-i2s.0 mapping ok [ 2.585000] TCP: cubic registered [ 2.590000] NET: Registered protocol family 17 [ 2.595000] NET: Registered protocol family 15 [ 2.600000] NET: Registered protocol family 35 [ 2.600000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 2.610000] Registering SWP/SWPB emulation handler [ 2.615000] VDD_G3D_1.0V: incomplete constraints, leaving on [ 2.620000] VDDQ_LCD_1.8V: incomplete constraints, leaving on [ 2.625000] s3c-rtc s3c64xx-rtc: setting system clock to 2012-09-28 19:58:07 UTC (1348862287) [ 2.640000] ALSA device list: [ 2.640000] #0: hkdk-max98090 [ 2.640000] Freeing init memory: 160K [ 2.690000] usb 1-2: New USB device found, idVendor=0424, idProduct=3503 [ 2.690000] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.700000] hub 1-2:1.0: USB hub found [ 2.700000] udevd[1213]: starting version 175 [ 2.705000] hub 1-2:1.0: 3 ports detected [ 2.955000] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem [ 2.960000] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 2.995000] usb 1-2.1: new high-speed USB device number 3 using s5p-ehci [ 3.100000] usb 1-2.1: New USB device found, idVendor=0424, idProduct=9514 [ 3.100000] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.110000] hub 1-2.1:1.0: USB hub found [ 3.115000] hub 1-2.1:1.0: 5 ports detected [ 3.205000] usb 1-2.2: new full-speed USB device number 4 using s5p-ehci [ 3.310000] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c525 [ 3.315000] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.320000] usb 1-2.2: Product: USB Receiver [ 3.325000] usb 1-2.2: Manufacturer: Logitech [ 3.335000] input: Logitech USB Receiver as /devices/platform/s5p-ehci/usb1/1-2/1-2.2/1-2.2:1.0/input/input0 [ 3.345000] hid-generic 0003:046D:C525.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-s5p-ehci-2.2/input0 [ 3.355000] input: Logitech USB Receiver as /devices/platform/s5p-ehci/usb1/1-2/1-2.2/1-2.2:1.1/input/input1 [ 3.365000] hid-generic 0003:046D:C525.0002: input,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-s5p-ehci-2.2/input1 [ 3.460000] usb 1-2.3: new full-speed USB device number 5 using s5p-ehci [ 3.570000] usb 1-2.3: New USB device found, idVendor=0472, idProduct=0068 [ 3.575000] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.580000] usb 1-2.3: Product: Generic USB Hub [ 3.585000] usb 1-2.3: Manufacturer: Chicony [ 3.590000] hub 1-2.3:1.0: USB hub found [ 3.595000] hub 1-2.3:1.0: 3 ports detected [ 3.685000] usb 1-2.1.1: new high-speed USB device number 6 using s5p-ehci [ 3.795000] usb 1-2.1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.800000] usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.890000] usb 1-2.3.1: new full-speed USB device number 7 using s5p-ehci [ 3.985000] usb 1-2.3.1: New USB device found, idVendor=0472, idProduct=0068 [ 3.990000] usb 1-2.3.1: New USB device strings: Mfr=5, Product=6, SerialNumber=0 [ 3.995000] usb 1-2.3.1: Product: PFU-68 USB Keyboard [ 4.000000] usb 1-2.3.1: Manufacturer: Chicony [ 4.010000] input: Chicony PFU-68 USB Keyboard as /devices/platform/s5p-ehci/usb1/1-2/1-2.3/1-2.3.1/1-2.3.1:1.0/input/input2 [ 4.020000] hid-generic 0003:0472:0068.0003: input,hidraw2: USB HID v1.00 Keyboard [Chicony PFU-68 USB Keyboard] on usb-s5p-ehci-2.3.1/input0 [ 8.580000] [MAX98090] max98090_set_playback_speaker_headset(111) [ 14.775000] EXT4-fs (mmcblk0p3): recovery complete [ 15.020000] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 15.420000] init: ureadahead main process (1353) terminated with status 5 [ 15.915000] udevd[1404]: starting version 175 [ 17.105000] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ 17.145000] input: gpio-keys as /devices/platform/gpio-keys.0/input/input3 [ 17.275000] s5p-mixer s5p-mixer: start latency exceeded, new value 1625 ns [ 17.275000] s5p-mixer s5p-mixer: state restore latency exceeded, new value 44000 ns [ 17.275000] s5p-mixer s5p-mixer: stop latency exceeded, new value 1250 ns [ 17.275000] s5p-mixer s5p-mixer: state save latency exceeded, new value 10083 ns [ 17.300000] rtusb init rt2870 ---> [ 17.300000] usbcore: registered new interface driver rt2870 [ 17.845000] mousedev: PS/2 mouse device common for all mice [ 17.905000] smsc95xx v1.0.4 [ 17.960000] smsc95xx 1-2.1.1:1.0: eth0: register 'smsc95xx' at usb-s5p-ehci-2.1.1, smsc95xx USB 2.0 Ethernet, 62:15:bf:4d:f9:41 [ 17.960000] usbcore: registered new interface driver smsc95xx [ 18.475000] max98090_set_playback_path [682] param 2 [ 18.480000] [MAX98090] max98090_set_playback_speaker_headset(111) [ 18.480000] max98090_set_record_path [734] param 0 [ 18.480000] [MAX98090] max98090_set_record_main_mic(150) [ 19.515000] init: gator-daemon main process (1754) terminated with status 1 [ 19.575000] init: failsafe main process (1735) killed by TERM signal [ 20.490000] Bluetooth: Core ver 2.16 [ 20.490000] NET: Registered protocol family 31 [ 20.490000] Bluetooth: HCI device and connection manager initialized [ 20.490000] Bluetooth: HCI socket layer initialized [ 20.490000] Bluetooth: L2CAP socket layer initialized [ 20.490000] Bluetooth: SCO socket layer initialized [ 20.545000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.545000] Bluetooth: BNEP filters: protocol multicast [ 20.595000] Bluetooth: RFCOMM TTY layer initialized [ 20.595000] Bluetooth: RFCOMM socket layer initialized [ 20.595000] Bluetooth: RFCOMM ver 1.11 [ 20.740000] max98090_set_playback_path [682] param 2 [ 20.745000] [MAX98090] max98090_set_playback_speaker_headset(111) [ 20.745000] max98090_set_record_path [734] param 0 [ 20.750000] [MAX98090] max98090_set_record_main_mic(150) [ 21.035000] init: hybrid-gfx main process (1870) terminated with status 1 [ 21.370000] init: tty1 main process (1961) killed by TERM signal [ 21.990000] s5p-mixer s5p-mixer: state save latency exceeded, new value 10084 ns [ 22.455000] smsc95xx 1-2.1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 23.490000] NET: Registered protocol family 10 [ 25.390000] s5p-hdmi exynos4-hdmi: start latency exceeded, new value 750 ns [ 25.405000] s5p-hdmiphy 8-0038: s_dv_preset(preset = 18) [ 25.420000] s3c-i2c s3c2440-hdmiphy-i2c: timeout waiting for bus idle [ 25.430000] plugged [ 25.430000] s5p-hdmi exynos4-hdmi: state restore latency exceeded, new value 40067258 ns [ 25.430000] s5p-hdmiphy 8-0038: s_stream(1) [ 25.540000] s3c-i2c s3c2440-hdmiphy-i2c: timeout waiting for bus idle [ 30.220000] ### max98090_dai1_hw_params### [ 30.235000] max98090_get_playback_path [718] current playback path 2 [ 30.235000] max98090_get_record_path [759] current record path 0 [ 30.240000] ### max98090_dai1_hw_params### [ 30.255000] max98090_get_playback_path [718] current playback path 2 [ 30.255000] max98090_get_record_path [759] current record path 0 [ 30.260000] ### max98090_dai1_hw_params### [ 30.260000] max98090_get_playback_path [718] current playback path 2 [ 30.260000] max98090_get_record_path [759] current record path 0 [ 30.265000] ### max98090_dai1_hw_params### [ 30.265000] ### max98090_dai1_hw_params### [ 30.275000] ### max98090_dai1_hw_params### [ 30.275000] max98090_get_playback_path [718] current playback path 2 [ 30.275000] max98090_get_record_path [759] current record path 0 [ 30.290000] ### max98090_dai1_hw_params### [ 30.295000] max98090_get_playback_path [718] current playback path 2 [ 30.295000] max98090_get_record_path [759] current record path 0 [ 34.070000] warning: process `colord' used the deprecated sysctl system call with 8.1.2. [ 35.520000] samsung-i2s samsung-i2s.0: i2s_set_sysclk:402 Other DAI busy [ 38.225000] init: origen-bluetooth pre-start process (1864) terminated with status 1
note
- arch:armhf