最終更新:2024-01-15 (月) 02:43:38 (115d)
Creality Print/設定
Top / Creality Print / 設定
Creality Print 4.3.8
マテリアルの違い
Hyper PLA Generic PLA Printing Temperature? 220 230 Build Plate Temperature? 60 45 Outer Wall Flow 98 90 Inner Wall(s) Flow? 100 95 Top/Bottom Flow? 90 100 Infill Flow? 120 95 Support Flow? 100 80 Support Interface Flow? 100 100 Support Roof Flow? 100 100 Support Floor Flow? 100 100 Max volumetric speed? 27.00 18 Regular Fan Speed? 100% 50% Regular/Maximum Fan Speed Threshold? 10 15 Small Feature Fan Speed? 100% 50% Minimum Speed? 10 20 Cds Fan Speed? - 50% Special Cds Fan Speed? 10080
品質の違い
High Quarity Normal Layer Height 0.10 0.20 Bridge Sparse Infill Max Density? 0 20 Bridge Skin Speed? 15 100 bridge_skin_speed_2 25 100 bridge_skin_speed_3 15 100 Top Layers? 8 4 Bottom Layers? 8 4 Initial Bottom Layers? 4 2 Extra Skin Wall Count? 1 0 Connect Infill Polygons? true false Infill Wipe Distance? 0.00 0.10 Skin Removal Width? 0.8 0.82 Bottom Skin Removal Width? 1.2 0.82 Print Speed? 300 300 Infill Speed? 300 300 Outer Wall Speed? 150 200 Top/Bottom Speed? 120 200 Support Speed? 150 300 Support Infill Speed? 60 300 Support Interface Speed? 25 200 Support Roof Speed? 50 200 Support Floor Speed? 50 200 Initial Layer Print Speed? 50 100 Initial Layer Travel Speed? 120 150 Skirt/Brim Speed? 50 100
メモ
デフォルト Wall Flow - Outer Wall Flow 98% Inner Wall(s) Flow? 100% Wall Line Count 2 Support Wall Line Count 2 1 Tree Support Trunk Diameter? 15 25
メモ
- Enable Ironing?
- Enable Jerk Control?
