最終更新:2012-11-02 (金) 14:48:45 (4164d)
ODROID-X/カーネル
http://dev.odroid.com/projects/odroid-xq/#s-3.1.2
ODROID-X/カーネル/ビルド
ODROID-X/Android
Enter into fastboot mode.
- Remove your SD-card and check the jumper JP2 is unconnected.
- If you have the USB-UART kit, press any key within 3 seconds in your terminal software after power on.
- And enter 'fastboot' in u-boot prompt.
- If you don't have the USB-UART kit, press & hold "user" button(SW3) of ODROID-X board and power on.
- After 6~7 seconds, release the "user" button.
- And connect your ODROID-X to host PC with Micro-USB cable.
- fastbootモードで起動するとデバイスマネージャーでAndroid Phone->Android Bootloader Interfaceとして認識される
fastboot flash kernel ./zImage fastboot reboot
オーバークロックカーネル
- http://odroid.foros-phpbb.com/t1159-kernel-v45-overclock-update-13-10-12
- http://www.mdrjr.net/odroid/kernel/