最終更新:2023-07-11 (火) 08:08:51 (293d)
hostapd.conf
Top / hostapd.conf
http://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf
項目
driver?
auth_algs?
- 暗号化なしの時:0
- WPAのみ用いるとき:1 (IEEE 802.1Xの時もこれ)
- WEPのみ用いるとき:2
- 両方用いるとき:3
wpa
- bit0 = WPA
- bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
hw_mode?
# Operation mode (a = IEEE 802.11a (5 GHz), b = IEEE 802.11b (2.4 GHz), # g = IEEE 802.11g (2.4 GHz), ad = IEEE 802.11ad (60 GHz); a/g options are used # with IEEE 802.11n (HT), too, to specify band). For IEEE 802.11ac (VHT), this # needs to be set to hw_mode=a. When using ACS (see channel parameter), a # special value "any" can be used to indicate that any support band can be used. # This special case is currently supported only with drivers with which # offloaded ACS is used. # Default: IEEE 802.11b
wpa_key_mgmt?
- WPA-PSK = WPA-Personal? / WPA2-Personal
- WPA-EAP = WPA-Enterprise? / WPA2-Enterprise
- SAE = SAE (WPA3-Personal)
eap_server
- Use integrated EAP server instead of external RADIUS authentication server.
