最終更新:2025-01-21 (火) 12:11:45 (147d)
USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi
Top / USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi
https://www.adafruit.com/product/954
メモ
- VCC:5V/500mA
- TXD/RXD: 3.4V
チップ
メモ
- This cable is not good for Arduino re-programming such as a Boarduino, MENTA, Monochron, etc. because it does not have the DTR/RTS wire necessary for initiating the bootloader reboot sequence. For that we suggest an FTDI cable or FTDI friend.
配線
- red power (5V)
- black ground
- white RX into USB port
- green TX out of the USB port.
接続
- The black lead to GND (3rd pin down)
- The white lead to TXD on the Pi (4th pin down)
- The green lead to RXD on the pI (5th pin down)